Monday, September 20, 2010

More 2-3-2

The drive system is bolted in the frame now.
I had a hard time figuring out how to bolt all the parts and being able to get to
the screws.
I drilled a 1/2 inch hole just above the main shaft on the gear and the way I bolt everything is:
Bolt the bearing to the frame, Through the 1/2 inch hole screw the body to shoulder hub
to the outer flange of the bearing.
Then mount the drive system into the frame.
I'll show pictures next time.
Now the only thing I need is the drive motor. getting the right size, speed and strength will be the hardest part.