Baseplate Ankle Insets & 2nd Plate

On the bottom picture, You can see the Ankle Insets being glued into place.
This area provides a clearing for the outer legs to pass the body if your
building your droid to stand on 2 feet and then move to the 3 leg position.
This movement is known as the 2-3-2.

The next picture shows the 2nd ring being glued into position.
There's 10 spots that have to be glued and the way I did this one
is to lay the plate on top of the verticals and align the plate as
best as you can with the scribed marks facing up.
Glue 1 vertical then after it dries glue another vertical across
from the one you just glued. Make sure you pay close attention to all
the scribes as you work around the plate.
I left the Ankle Inserts as the last parts that get glued after the
other eight.
I also used the Weldon can as a weight to keep the verticals in place as I glued
them.